WAC Lighting - CT-6A-R2 - Accessory - 216 Inch Touch Panel Control with Occupancy Sensor

All-In-One lighting control system with on/off touch panel and motion sensor, for use with WAC Lighting 12V or 24V low voltage class 2 transformer.
Three custom settings of lighting control include:
1. Touch and Sensor: Touch panel turns the luminaire on/off manually while the motion sensor turns it off when the space is vacant.
2. Touch: Touch panel turns the luminaire on/off manually.
to shut off after last detection of motion
3. Sensor: Motion sensor turns the luminaire on/off autonomously.
Motion Sensor:
Detects within 16 foot range.
Integral light off timer can be set between 10 seconds and 20 minutes.
to shut off after last detection of motion.
Programmed with three functions:
TOUCH and SENSOR To activate both motion sensor and touch switch.
TOUCH Only touch switch, inactivate motion sensor.
SENSOR Only motion sensor, inactivate touch switch.
Built-in adjustable timer on motion sensor allows automatic shut off after the sensor covered area is vacated.
Maximum time delay is 20 minutes (20MIN), minimum is 10 seconds (10S).
Motion sensor supplied with 18ft wire and touch panel supplied with 8ft wire. May be cut to desired length.
Lengthening of wire is not recommended as will decrease sensitivity.
Two different mounting options (screw or double sided tape mounting) for all undercabinet application included.
Choose appropriate mounting option for rough, smooth and curved surfaces.
Designed for indoor undercabinet application. Recommended ambient temperature is 14 degree to 122 degree F (-10 degree to 50 degreeC)
5 year WAC Lighting product warranty

Warranty: 5 Years Components/2 Years Finish