Buy the Auburn Pellet Stove Heater - NPS40 on http://www.homeclick.com/ Print This PagePrint This Page
Auburn Pellet Stove Heater - NPS40 image
 
(based on 2 ratings)
Read All Reviews
Brand: Napoleon
Located in: Fireplaces, Stoves, Pellet

Napoleon's pellet stove offers powerful heating performance and value

PELLET VENT MUST MAINTAIN A MINIMUM 3" CLEARANCE TO ANY COMBUSTIBLE (install vent at clearances specified by the vent manufacturer). DO NOT CONNECT THE PELLET VENT TO A VENT SERVING ANY OTHER APPLIANCE OR HEATER. DO NOT INSTALL A FLUE DAMPER IN THE EXHAUST VENTING SYSTEM OF THIS UNIT.

Venting must be an approved 3" or 4" Diameter Type "L" vent, vented to the outside or connect the vent to a factory built type "A" chimney using an adaptor; and/or stainless steel chimney liner for masonry fi replace installations. Use 4" diameter vent if vent or liner height is over 15' or if installation is over 4,000' above sea level.


  • Full BTU range from 8,000 to 43,000 (may vary depending on pellet quality)
  • Automatic ignitor
  • Variable speed auger and variable speed blower for maximum comfort and control
  • Heavy duty. 1/8" thick, seamless heat exchange tubes radiate heat out into the room even after the stove is shut down
  • High velocity and strategically positioned burn pot features aerodynamic pellet flow creating full, active YELLOW DANCING FLAMES
  • Will not overheat with the 4 stage FAILSAFE system featuring an automatic blower override switch, high temperature limit switch, low air pressure switch and power failure safety shut down
  • Built-in heat exchange cleaner rod maintains cleanliness and efficiency of heat exchange tubes
  • Convenient, easy to clean ash pan removal
  • Zone heating home furnace
  • Clean glass air wash system
  • Easy push open access control panel
  • Easy clip hinged door for easy access to combustion chamber for routine maintenance...no tools required
  • EPA exempt
  • President's Limited Lifetime Warranty


  • Includes convenient and easy to use burn pot removal tool/rake
  • Includes choice of door finish
  • Includes black trivet, other finishes available (see related items or accessories)


Minimum BTU/hr8,000 BTU
Maximum BTU/hr43,000 BTU
Net Weight210 lbs
Width22-3/8 in
Height30-1/2 in
Depth26-5/8 in
Exhaust Collar3 in
Intake Collar2 in
Hopper Cap55 lbs
Minimum Burn Rate/Hr1 lb
Maximum Burn Rate/Hr5 lb
Startup Wattage400 W
Operation Wattage180 W
Electrical Rating - Voltage115 V
Electrical Rating - Amperage3.6 Amps


  •  Don't have Adobe Acrobat?
    to download Adobe Acrobat Reader
More information for the Auburn Pellet Stove Heater - NPS40
Review Snapshot®
Avg. Customer Rating:
 
3 stars
(based on 2 reviews)

[1 of 1 customers found this review helpful]

 
Loud Loud Loud!
By Lisa from Northeast on 2/1/2009
Pros:
Easy To Clean, Heats Evenly
Cons:
Doesn't Give Off Enough Heat
Best Uses:
Small Rooms
Describe Yourself:
Midrange Shopper
Bottom Line:

Comments about Napoleon Auburn Pellet Stove Heater - NPS40:

The blower is so loud....I wished I had known before I purchased....definately would not have done so.

[0 of 1 customers found this review helpful]

 
awesome stove
By John M from Ansonia CT on 10/22/2008
Pros:
Easy To Clean, Heats Up Quickly
Bottom Line:

Comments about Napoleon Auburn Pellet Stove Heater - NPS40:

For an inexpensive way to heat your home this stove is the way to go.

Customer Reviews about the Auburn Pellet Stove Heater - NPS40 at HomeClick
Powered by PowerReviews
Copyright © 2011 HomeClick All Rights Reserved. Do not republish contents.