Patented dual-sensitivity scanning to find studs behind thicker walls.

StudSensor™ Pro finds the edges of studs and joists up to 3/4 inches (19 mm) deep in normal mode.

In Zircon's patented DeepScan® mode, StudSensor Pro can find studs up to 1-1/2 inches (38 mm) deep behind drywall, paneling, or plywood, or a combination of them, and through most bare wood flooring.

A bright LED tells you when DeepScan is active. When you detect the edge of a wood or metal stud, it is indicated by an audio tone and an LED array.

• Finds both wood and metal studs
• DeepScan® mode
• Patented TruCal® instant calibration
• Bright LEDs and audio indicators
• Tough for jobsite use
• Find the edges of wood or metal studs or joists to:
  • Hang cabinets and shelves securely
  • Hang pictures and mirrors
  • Install ceiling fans and chandeliers
  • Install drapery rods and closet organizers
  • Install plant hangers, towel bars, etc.
• Uses a patented sensor that pinpoints the edges of wood or metal studs behind walls, floors, or ceilings
• DeepScan mode for extra-thick surfaces—up to 1-1/2 inches (38 mm) of drywall, paneling,or plywood, or a combination of them, and through most bare wood flooring
• Calibrates instantly for immediate use
• Bright LEDs and an audio signal indicate stud edges
• Made to withstand daily jobsite use