|
The Saniswift is a gray water pump that is ideally suitable for use in a basement apartment or anywhere in the house where additional fixtures are most wanted. It will pump the waste water away from a variety of sources such as: a kitchen sink, laundry sink, washing machine (indirect connection), dishwasher, bar sink, etc.
The Saniswift's modern style prevails over other bulky relics. This system offers powerful and economical pumping action in a compact, contemporary design. With unprecedented performance and features, this pump is unmatched in its class.
Key Features
- Comprises of a pressure switch and circuit board assembly, which starts and stops the unit, and the motor, which drives the pump.
- Moving parts are kept to an absolute minimum.
- The unit pumps the effluent upward to 14 feet and/or 140 feet horizontally (with gravity fall).
- When adding a shower, a base will have to be constructed. This base should be made out of a 2" x 6" (minimum) or 2” x 8” (recommended) on edge, to allow for the installation of a P-trap and the required 1/4” per foot gravity flow towards the pump unit.
- The waste water from other sanitary fixtures is discharged into the Saniswift via two 1-1/2 inch inlets.
- A vent connection on the lid.
- Highly recommended for the gray water pump to be connected to a Ground Fault Interrupter (GFI) circuit.
- A compact unit with attractive rounded contours that fits neatly into tight spaces.
- Certified to American and Canadian Standards. Electrical standard UL 788, CA: Electrical standard CSA C22.2
- The Saniswift comes with the pump case only.
|
