|
|
|
|
Saniplus - Two Piece Elongated Elongated Bowl with Macerating Pump - White
| With Saniplus, renovations take on a whole new level of flexibility. Saniplus offers a high level of styling that makes it the ideal centerpiece for a modern bathroom. Besides it sleek, modern styling, Saniplus gives you the satisfaction of being environmentally friendly. The Saniplus unit requires just 1.6 U.S gals (6 liters) of water per flush, less than a 1/3 of what most conventional toilets require. Great styling. Ease of installation. And water conservation to boot. All good reasons to choose Saniplus for your next bathroom renovation. | |
Toilet Seat Included : No Type : Injector Pump Bowl Type : Elongated Collection : Sanipack Saniplus - Two Piece Elongated Elongated Bowl with Macerating Pump - White
- The Saniplus system includes: Elongated toilet bowl, toilet tank, and macerating unit. (TOILET SEAT NOT INCLUDED)
- The Saniplus is a system that is used to install a complete bathroom up to 15 feet below the sewer line, or even up to 150 feet away from a soil stack.
- The macerating system of the Saniplus can handle up to four fixtures, toilet, hand basin, shower and bathtub.
- The Saniplus toilet uses only 6 liters (1.6 USG) of water per flush.
- The Saniplus is simplicity itself to install; there are just four connections.
- The macerating pump is connected to the spigot of a horizontal outlet toilet.
- The toilet tank is connected to the water supply.
- The macerating pump is connected to the small diameter discharge pipe work.
- The macerating pump is connected to electrical supply.
- The Saniplus macerating system is comprised of a pressure chamber, which starts and stops the unit, and the motor, which drives the stainless steel macerator blades and pump.
- To learn more about the macerating process please refer to What is a macerator? in the Specification Tab. A normal operating cycle for Saniplus takes about 10–20 seconds depending upon the discharge pipe run configuration; power consumption is therefore minimal.
- The Saniplus is designed to provide vertical pumping up to 15 feet as well as a horizontal discharge, therefore a simple ball non-return valve is incorporated. This allows you to install a complete bathroom where previously this would have been impossible or where considerable capital equipment and structural work would have been necessary.
| |
Saniplus - Two Piece Elongated Elongated Bowl with Macerating Pump - White
| Dimensions |
Motor |
Electrical supply |
Discharge |
Gravity Fall on Horizontal installations |
| 12in (H) x 21in (W) x 9in (D) |
Induction Motor (no carbon brushes or gears), tested over 50,000 cycles. 3600 rpm |
110-115V; 60Hz; 15 AMP; usage 4.65 AMP. Connect to Ground Fault Circuit Interrupter. |
Horizontally to 150 ft (50m) Pumps vertically to 15 ft (4.6m) |
1/4in per ft |
| Discharge Pipe Diameter |
Construction Materials |
Normal Running Time |
Water per Flush |
Discharge rate |
| 3/4in; 21mm |
Polypropylene, C.R.P., stainless steel, Neoprene Max. temp. 104°F; 40°C |
10-20 seconds subject to installation pipe run |
1.6 US gal; 6 liters |
Volume 7.35 gal/m; 27 l/m |
What is a Macerator? |
 |
To "macerate" is to soften, to break in pieces. Our Saniflo macerating systems use a rotating cutting blade to liquefy human waste and toilet paper. When mixed with flushing water the waste is pumped into a sanitary sewer as a fine slurry. |
| Installing a bathroom where you want is often difficult and sometimes even impossible. The main drainpipe is either too far away, or the new bathroom or sink will be lower than the drainpipe, making conventional installation unworkable. So what you need is the Saniflo up flush toilet and macerating pump that requires minimal construction work. |
 |
| Saniflo’s macerator units solve these problems, because they can grind and pump waste over a distance of 150 feet and up to a height of 18 feet. These systems automatically activate when required to reduce effluent to a slurry and pump it away to the soil stack, septic tank or sewer through small diameter discharge pipes. And here is how it works. |
 |
| 1. The toilet is flushed and the effluent is discharged by gravity through the rear spigot and into the macerator device. The effluent rises to a preset level, a micro-switch in the pressure chamber of the macerating device is activated. |
 |
|
| 2. Simple flapper style check valves on each of the side inlets close momentarily, while the blades inside rotate at 3,600 revolutions per minute and reduce any solids within the effluent into liquid, in about 3 or 4 seconds. |
 |
|
| 3. All waste is pumped into a sanitary gravity drain (a soil stack or a septic tank) through a standard pipe just ¾" or 1" in diameter. Once the liquid effluent is completely pumped out of the macerator, the micro-switch deactivates. |
 |
|
| 4. A non-return valve in the macerating unit prevents back-flow of the reduced effluent into the unit. The toilet refills with water. The macerator is now empty (apart from the water seal) and the system is ready for use again. |
 |
|
| NOTE: Toilet flush is given priority if another appliance is simultaneously discharged until the effluent from the toilet is sufficiently reduced, so that pressure switch is deactivated. \ | |
Saniplus - Two Piece Elongated Elongated Bowl with Macerating Pump - White
|
|
|
| If you like Saniflo Saniplus - Two Piece Elongated Elongated Bowl with Macerating Pump - White, also available |
|
|
|
|
|
|
Shopping Cart
icon.
